pouch cell

Laboratory Compact Pouch Cell Tab Cutting Cutter Machine For Battery Tab Shaping Product overview This equipment is to achieve the function of cutting the tab of large polymer, small equipment, simple operation, and stable cutting. Both positive and negative tabs are cut without short circuit.   Product characteristics 1, small and simple equipment, easy to operate, low failure rate. 2. The machine solves the problem of simultaneously cutting the positive and negative electrodes of the polymer built-in battery to avoid short circuit. 3, used for cutting the length of the positive and negative ear before the polymer built-in battery welding protection plate (including mobile phone battery, mobile power supply, power battery, etc.).   Technical parameters Power supply 220V50Hz 30W Air source 0.4-0.8MPa Applicable battery type Polymer battery Max. tab width 194mm Min. gap of tab 10mm The tab retains the shortest length 5mm Cell length 30-200mm Cell width 30-300mm Cell thickness 2-12mm Weight 10kg Dimension 300*300*210mm Cutting tab’s thickness Al, Ni: max. 0.6mm nickel plated copper: 0.4mm                     

Rotary Spot Welding Machine for Polymer Batteries Ⅰ、Product Overview This device is simple and easy to learn, easy to operate, and has a low failure rate. It is mainly suitable for the welding of polymer battery tabs. It can achieve automatic rotating pole ear welding and automatic material receiving, with controllable welding current. Simply manually put the battery and welding line into the fixture to start the program, and automatic welding can be carried out.     Ⅱ、Product features This equipment has six product workstations that can be used for circular placement of products for welding, improving production efficiency. Positive and negative electrode ears are welded point by point, reducing the defect rate of virtual welding. Mechanical suction cups are used to adsorb and move the discharge, greatly improving production safety and efficiency.   Ⅲ、Specification   SN Item Parameter 1 Equipment Name Rotary spot welding machine 2 Model No. TMAX-MYJ-DX10 3 Power supply AC 220V±10% 50Hz 4 Compressed air 0.4-0.6MPa 5 Suitable for Polymer batteries (fixtures can be customized according to the size of the battery) 6 Driving form Pneumatic+stepper motor 7 External dimensions L1450mm*W1040mm*H1330mm                                                                                                                                

Side Tape Pasting Machine for Polymer Battery Ⅰ、Product Overview 1 、 The equipment is simple and easy to learn, easy to operate, and has an extremely low failure rate. 2 、 This machine solves the problem of adhesive tape wrapping on both sides and bottom of polymer built-in batteries, with high consistency of adhesive wrapping, improving efficiency, and saving labor costs. 3 、 Adhesive tape for both sides and bottom of polymer built-in batteries (including mobile phone batteries, mobile power supplies, power batteries, etc.). Ⅱ、Product features 1.  The equipment is connected to a vacuum pump, with high vacuum degree and stable adhesive application; 2.  The adhesive length, adhesive width, and applicable cell thickness range are wide, with strong versatility; 3.  The production capacity can reach around 1200 times/H, with high production efficiency 4.  The device has two adhesive modes, L-type and C-type, to meet different adhesive requirements.   Ⅲ、Specification Specification Power supply 220V 50Hz Pressure 0.4-0.8MPa Suitable for Polymer cells Cell thickness 3-8mm Tape width 6-16mm Tape length 30-400mm Productivity About 1200 times/H Outer size 1150*800* 1300mm （L*W*H） Weight 60Kg