30L Advanced Vacuum Planetary Mixer with PLC Control System for Precision Batch Processing

Ⅰ. Equipment Features:

Applicable Scope

After the mixer completes slurry preparation, tilt the 30 L bucket to the elevator, cover with the mixing head to form the slurry transfer tank. This facilitates transferring slurry from the mixing room to the storage and coating room. The slurry is conveyed to the main tank or coating head via conversion fittings.

Ⅱ. Main Technical Parameters:

Container Parameters

Total design capacity: 45L

Effective volume: 15-30L

Container inner diameter: 400mm

Depth inside the container: 360 millimeters

Material in contact with the medium: SS 304

Temperature control jacket setting: single-layer jacket on the tank wall (for heating/cooling) and single-layer

jacket at the bottom

Clamp connection: G 1/2 "quick connect connector, pressure rating ≤ 0.4 MPa

Jacket circulation system: provided by the customer; Inlet water temperature ≤ 8 ° C, flow rate>15 L/min

Discharge outlet: One G 1 "three piece ball valve at the bottom, equipped with a 1" standard ISO quick clamp

Working environment temperature range: -10 ° C to+120 ° C

Portability: Wheel installation

Compatibility: Interchangeable with 30L mixer drum

Mixing Components

l Operating frequency: 50 Hz

l Mixing power: 0.75 kW (one unit)

l Mixing speed: 48 rpm (fixed)

l Impeller diameter: 380 mm

l Impeller type: inclined-paddle spiral

l Impeller material: SS 304

l Impeller tip speed: 1.0 m/s

l Number of impellers: 1

l Number of shafts: 1

l Clearance from impeller to tank wall: 10 mm

l Clearance from impeller to tank bottom: 8 mm

l Principle: unique inclined-paddle design prevents material sedimentation

Top Lid Components

l Lid material: SS 304

l Feed inlet: one ISO standard 1″ quick-connect

l Viewing ports: two DN50 tempered-glass sight glasses

l Vacuum module: one set with G 3/4″ connections (vacuum and vent)

l Mechanical vacuum gauge port: one Y60 mechanical gauge

Control System

l Electrical cabinet: houses inverter and low-voltage components

l Manual control panel: includes buttons, knobs, instruments

l Power supply: AC 3×380 V ±5%, 50 Hz

l Control method: electrical control

l Operation: button + knob panel on electrical cabinet

l Emergency stop: one button

l Start button: one

l Stop button: one

l Worklight switch: one

Safety Interlock System

Emergency stop: pushes E-stop, machine halts immediately; no further operation

Other Notes

l Oil seals: domestic brand; static seal by O-ring, dynamic by mechanical or skeleton seal

l Lubricant grease: domestic

l Valves: domestic

l Vacuum requirements: customer-supplied vacuum system at 8 L/s (2×8)

l Vacuum retention: –0.098 MPa, must hold >–0.085 MPa for 24 h without leakage

l Main power: >1 kW

l Total weight: approx. 250 kg

l Dimensions: L 594 mm × W 560 mm × H 1420 mm

l Color: off-white

l Load-bearing floor: 400 kg/m²

Ⅲ. List of Randomly Supplied Wear Parts:

Ⅳ. Supporting Conditions: