Automatic Tabs Welding Machine for Prismatic Cell Production Line

Ⅰ、Process:

Manual tabs feeding - Short circuit test - Tabs pre welding - Tabs cutting -Tabs handle to Tab welding - Tabs paste short adhesive - Tabs paste long adhesive - Short circuit test - Manual cutting and other functions.

During tabs welding, the stacked core servo moves in steps and can set the welding position and number of welding points.

 

Ⅱ： The device is suitable for cell range:

Model NO.:TMAX-ZTHHJX-150		Model No.:TMAX-ZTHHJX-300
Cell length	50--150mm	Cell length	130-300mm
Cell width	40-100mm	Cell width	90-230mm
Cell thickness	3-10mm	Cell thickness	5-15mm

 

Ⅲ、Specification

Item	Acceptance process technical parameters
Single sheet productivity	≤6—8/pcs
Accuracy of left and right alignment before and after tabs welding	±0.3mm
Tabs alignment accuracy	±0.3mm
Burr cutting accuracy	≤0.06mm
Alignment accuracy before and after gluing	±0.5mm
Operating rate	95%（Defects caused solely by the machine）
Pass rate	95%（Defects caused solely by the machine）

 

Item	Specification
Size	L 9800mm  *W1300mm  *H1800mm（Detachable combination）
Weight	4000KG
Power	AC220V±10％ ,single phase, power  10KVA；
Compressed air	Pressure：0.5-0.7MPa(5kgf-7kgf/cm2)  ;consumption：200L/min
Bearing	450Kg/M2
Temperature and humidity	5-35℃; 5-55%
Airborne dust	Free from salt, corrosive gases, conductive dust, etc