Laboratory high-temperature battery thermal shock Tester

Introduction

The battery thermal shock test box is to simulate the battery placed in a high temperature box with natural convection or forced ventilation. It is heated to the set test temperature at a certain heating rate and maintained for a certain period of time. The hot air circulation system can ensure the uniform working temperature distribution.

Meet the standards

GB/T 31485-2015, GB/T 31241-2014, UN38.3,IEC62133, QC/T743-201X, GB/T 8897.4-2008, GB/T 21966-2008

SPECIFICATIONS

Inner box size	W400xD400xH450mm
Outer box size	W650xD920xH30mm
Temperature range	Normal temperature~200℃
Temperature display accuracy	0.1℃
Temperature stability	±1.0℃
Temperature uniformity	±2℃
Heating time	(5±2)℃/min, (average heating, non-linear no-load)
Temperature control meter	Programmable temperature controller, which can control the total heating time, which is different from ordinary temperature control meters.
Material of inner box	Stainless steel plate
Outer box material	Cold-rolled steel plate baking varnish
Insulation material	High-efficiency compressed glass wool
Heat preservation device	Non-fuse switch, over-temperature protection switch, fuse
Power supply	1∮, 220V, 20A
Safety device	Secondary over-temperature alarm, MCCB overload protection, etc.
Exhaust flue	Blade design can adjust the air volume
Control formation	When the temperature of the battery thermal shock test box reaches the set temperature, the time meter will be turned on automatically, and the heating power will be cut off when the time is reached, and the buzzer will prompt
Air circulation system	Convective air circulation system
Control system	When temperature is reached, stop when time is reached, buzzer prompts.