Automatic Pouch Cell Stacking Machine For Lithium Battery Stacking Process

Functions 
● This equipment is suitable for the lithium-ion battery batteries of anode and cathode Z with isolation membrane laminated assembly, automatic outsourcing isolation membrane in the polar group, automatic cutting off the diaphragm, automatically terminate locking adhesive tape, automatic blanking, manual collect batteries.

Features
● Anode and cathode are single configuration manger, the trough’s sheet with real-time lifting structure;
● Slight bend, brush, shaking and flexible sucker can effectively prevent the multi-plate absorption phenomenon;
● Secondary precise positioning, ensure the plate alignment degree;
● Equipment dust removal device, can focus the dust collector chipped, ensure mechanical mesa clean;
● Anode and cathode pressure claw cathode film, prevent cross contamination phenomenon;
● solation membrane ion wind blow dry, remove the isolation membrane electrostatic;
● Secondary positioning installation of ultrasonic sensor to detect repeat or lack of pills;
● Adopts servo drive lamination machine, can make the stress between the layers of sheet was evenly;
● Imported non-trace buffer sucker, effective to prevent the occurrence of suction plate printing, indentation phenomenon;
● With functions of diaphragm recycling and the first piece of diaphragm correction function.

Technical Parameters(for reference)：

ITEM	HBZDP150	HBZDP250	HBZDP300
Measure	1800*1600*1950mm (L*W*H)	1920*1850*1950mm (L*W*H)	2100*1850*1950mm (L*W*H)
weight	About 1.0 T	About 1.2 T	About 1.3 T
power	AC220V/50HZ, 3.0kw	AC220V/50HZ, 3.0kw	AC220V/50HZ, 3.0kw
Air source	＞0.6Mpa,30L/min	＞0.6Mpa,30L/min	＞0.6Mpa,30L/min
Vacuum source	≤-0.09Mpa,15L/s	≤-0.09Mpa,15L/s	≤-0.09Mpa,15L/s
Applicable range	L:50-150mm,W: 35-90mm,T:5-30mm	L:100-250mm,W: 60-150mm,T:5-50mm	L:150-300mm,W:100-200mm,T:5-50mm
Capacity	1.1-1.4s/plate	1.2-1.6s/plate	1.3-1.7s/plate
Action	＞99%	＞99%	＞99%